A naerobic Adhesives cure only in the absence of air and in the presence of metal. They cure to form a tough durable polymer which exhibits excellent chemical and environmental resistances. At Impact Adhesives we use only the finest resins and ingredients when formulating and manufacturing our anaerobic adhesives. This ensures the products exceed our rigorous quality checks before finally reaching you, our customer. Our products are used for thousands of different applications across the industrial market; including automotive, aerospace, marine, transport, general and precision engineering as well as manufacturing and assembly. We segment our anaerobic range into four distinct categories for ease of application and product identification. These categories are Threadlocking, Threadsealing, Retaining and Gasketing.

Anaerobics

Product Range

THREADLOCKING

Impact Adhesives threadlocking adhesives (100 series) are used to lock threaded components and prevent vibration loosening whilst sealing the threads against leakage and corrosion. Only a small amount of adhesive is required to replace many unsuitable and inadequate traditional mehtods of fastening. Our threadlocking adhesives both improve performance and productivity, therefore reducing costs.

101
Screwlock low strength threadlocking adhesive is recommended for the locking and sealing of non-ferrous and softer grades of metal fasteners. It replaces nylon patches, star and spring washers on threaded fasteners. Its low strength allows easy dismantling.

Locking
102
Oil Tolerent Nutlock is a medium strength threadlocking adhesive recommended for use on lightly oiled and contaminated ferrous and non-ferrous metals. 102 has increased handling strength over standard grades, especially on alloys and passivated metals. 102 is medium strength and will allow for dismantling.

Retaining

103
Nutlock is a medium strength threadlocker effective on all industrial metals. Components bonded with 103 Nutlock will lock, seal and resist vibration loosening. Its medium strength means that components locked with 103 can still be dismantled by hand, using a normal spanner.

105
Studlock is used for high strength locking and sealing of studs, nuts and bolts. The adhesive is used on components that do not normally require dismantling.

107
Penetrating is an extremely low viscosity high strength threadlocking adhesive used to wick into pre-assembled components. It can also be used to seal porous dies and sand castings such as engine blocks.

THREADSEALING

The 200 series of Impact Adhesive Threadsealers are used on all types of threaded seals exposed to various liquids and gases. A wide range of strengths and viscosities means no application is too demanding.

201
Hydraulic Sealant is a medium viscosity, medium strength product used for sealing hydraulic and pneumatic connectors as well as small parallel and tapered threads. 201 combines high pressure and good temperature resistance with a slightly thixotropic nature preventing migration into critical areas prior to curing.

Threadsealing

203
Pipe Seal for medium strength sealing of coarse threaded components and pipe fittings. It is more versatile than traditional tapes and hemp while providing instant low pressure start up of sealed threads when tightened to specification.

205
Pipe Seal (TeflonTM) is a universal pipe seal to cover all normal pipe sealant applications. In addition to this it contains TeflonTM to tighten and seal components more easily.

Sealants

207
Flange Seal has been specifically formulated to seal flanges such as pipe flanges, carburettor flanges and transmission assemblies. Retaining

RETAINING

Impact Adhesives range of Retainers (300 Series) are formulated to effectively bond and seal cylindrical components such as shafts, drives and bearings.

301
Retainer is our standard high performance retainer for locking slip fitted and light press fitted parts such as bushes, splines and rotors.

Retainers

303
High Strength Retainer exhibits similar properties to our standard retainer with increased holding capabilities.

305
High Temperature Retainer will withstand temperatures not normally associated with standard retaining adhesives, providing an even greater range of suitable applications.

307
Bearing Fit Retainer is medium strength, designed specifically to lock and seal bearings, liners, keys and splines while at the same time increase the reliability of parts thus preventing fretting, corrosion and leakage.

309
Retainer is a higher viscosity retaining adhesive to provide greater gap filling capability.

310
Oil Tolerant Retainer is a high strength retainer designed to perform well on lightly contaminated substrates where pre-cleaning is not always possible. 310 performs well on most metals and offers faster handling rates on alloys and passivated metals.

GASKETING

Bearing Fit Our 400 Series of gasketing products enable customers to eliminate expensive pre-shaped gaskets and provide much greater flexibility in terms of suitable applications. Gasketing compounds may also be used to repair broken or worn parts, reducing machine down time and once again improving productivity.

403
Gasket Seal is our general purpose high performance gasketing compound capable of sealing small and large gaps on virtually any shape and size of component. Typical applications include transmission and engine flanges as well as smaller close fitting parts. 403 can be screen printed to improve accuracy and productivity.

405
High Temperature Gasket Seal is recommended for sealing components operating continually up to 200C. Its increased chemical and environmental resistances make it ideally suited for the most demanding of industrial applications.

Gasketing The anaerobic adhesives detailed above represent only a fraction of the full range available. For further details please contact our technical department. At Impact Adhesives we pride ourselves on being able to react effectively to our customers requirements. Therefore, if there is an application requiring a special product, unlike many companies, Impact Adhesives welcome the opportunity to manufacture specific products for specific applications, ensuring our customers get the very best in terms of product performance and service. adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives adhesives